• Peg It on GarageMonkey
MOTOGP: Sepang Test II Day One Ticker
MotoGP World Championship preseason testing picked back up in Sepang on Tuesday.
Media Release  |  Posted February 26, 2013   Sepang (MAL)

Gresini Racing

Just three weeks on from the first test of the 2013 preseason the MotoGP teams and riders were back at Sepang today for the the start of the second Malaysian session. Dry conditions this morning were replaced shortly before 3pm with a typical afternoon rain shower that brought proceedings to a premature conclusion. Team GO&FUN Honda Gresini spent the dry track time working on suspension solutions with Showa and with chassis geometry in order to find a better all around setting for the bike. Plenty more hard work is planned for both riders over the next two days of the test.

Alvaro Bautista “It was vitally important for us to get back on track so soon after the last test so that we can verify the work we did here three weeks ago and make the necessary changes over these next couple of days here in Malaysia. Unfortunately the weather didn't allow us much track time but in the [32] laps that we did we managed to make some important alterations to the geometry of the bike and suspension. We did a few laps in the wet too just to get some data for those conditions.”

Bryan Staring “For me it was important to get back here and complete some more laps as I continue my adaptation to MotoGP. It's really nice to be back at Sepang after just three weeks and I have spent the day trying to get a better feeling for the bike and learning more about this category. Lap by lap we are getting there and the team are helping out by improving the set-up of the bike. Unfortunately we couldn't get many laps done before the rain came but we got some important things done that set us up for tomorrow.”

Fausto Gresini “I wanted to be here in person at this second test in Malaysia so that I can have a look myself at the progress we are making. This is an important stage of preseason, when the lap times are not as important as the technical development. We have been working on finding an improved base set-up together with the guys at Showa and also working hard on improving the chassis geometry. We didn't have much time available today because the rain came in the afternoon but we have a good base to work from tomorrow.”
Page 6 of 7
Prev
1234567
Next
media_release's avatar

ABOUT THE AUTHOR

Media Release

MORE BY THIS AUTHOR